Our company has earned great laurels as manufacturers, traders and suppliers of Pressure Die Casting in the market at present. These are used when the casting alloy cannot be used in hot-chamber machines; these include aluminium, zinc alloys with a large composition of aluminium, magnesium and copper.

The process for these machines start with melting the metal in a separate furnace.

Our company has earned great laurels as manufacturers, traders and suppliers of Pressure Die Casting in the market at present. The metal is forced into a high grade steel tool at high speed and -pressure.

The casting temperature is roughly 700°C during casting. The use of vacuum casting technology is an advantage in order to achieve superior quality for light and thin walled components. On-time delivery is something that we always promise and maintain.

Our company has earned great laurels as manufacturers, traders and suppliers of Zinc Casting in the market at present. Common applications include connectors for wire and cable, electrical plug type connectors, door knobs, screws and nuts, bushings for corrosion, rolling mill bearings, and many more. The main function of this particular group of metals is to improve machinability.

This process uses three alloys of zinc, i.e. alloy 3, alloy 5 and alloy 7. We use mainly these alloys of zinc, because these alloys have good ductile and malleability properties.

Our company has earned great laurels as manufacturers, traders and suppliers of Zinc Die Casting in the market at present. The main function of this particular group of metals is to improve machinability. We use mainly alloys of zinc, because these alloys have good ductile and malleability properties.

They are known for their resistance towards corrosion and abrasion and their long service life. Common applications include connectors for wire and cable, electrical plug type connectors, door knobs, screws and nuts, bushings for corrosion, rolling mill bearings, and many more.

We are successful manufacturers, exporters, traders and suppliers of Pressure Die Casting and have never failed our customers on the aspects such as durability, design and patterns. The ejector die contains the ejector pins and usually the runner, which is the path from the sprue or shot hole to the mould cavity.

The cover die is secured to the stationary, or front, platen of the casting machine, while the ejector die is attached to the movable platen. The mould cavity is cut into two cavity inserts, which are separate pieces that can be replaced relatively easily and bolt into the die halves.

We are successful manufacturers, exporters, traders and suppliers of Pressure Die Casting and have never failed our customers on the aspects such as durability, design and patterns. This one relies upon a pool of molten metal to feed the die.

At the beginning of the cycle the piston of the machine is retracted, which allows the molten metal to fill the gooseneck. The pneumatic or hydraulic powered piston then forces this metal out of the gooseneck into the die.

We are successful manufacturers, exporters, traders and suppliers of Pressure Die Casting and have never failed our customers on the aspects such as durability, design and patterns. Further, these dies are fabricated at our state-of-the-art manufacturing unit under the guidance of our qualified professionals using the finest quality raw material and advanced technology.

Tested against various quality parameters, we offer them at most reasonable prices.

We manufacture, trade and supply a wide variety of Pressure Die Casting. Molten material is poured into a mould to duplicate a desired pattern.

The advantages of this system include fast cycle times (approximately 15 cycles a minute) and the convenience of melting the metal in the casting machine. This one is a metal casting process that is characterized by forcing molten metal under high pressure into a mould cavity.

As a prime manufacturer, trader and supplier of Pressure Die Casting, our company has established its name very strongly in the market. This one is a metal casting process that is characterized by forcing molten metal under high pressure into a mould cavity.

The mould cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mould during the process.

Alongside our aluminium and zinc high pressure die castings, we offer High Pressure Die Casting bespoke design service that is tailored to your specific needs. Our talented design team will work with you every step of the way from the design stages of an aluminium and zinc casting to the finished product.

We work hard to ensure that you receive aluminium and zinc castings of the highest quality, at a price that works for both parties through continuous stringent value engineered cost reductions.