Our company has earned great laurels as manufacturers, traders and suppliers of Pressure Die Casting in the market at present. The metal is forced into a high grade steel tool at high speed and -pressure.

The casting temperature is roughly 700°C during casting. The use of vacuum casting technology is an advantage in order to achieve superior quality for light and thin walled components. On-time delivery is something that we always promise and maintain.

Our company has earned great laurels as manufacturers, traders and suppliers of Pressure Die Casting in the market at present. These are used when the casting alloy cannot be used in hot-chamber machines; these include aluminium, zinc alloys with a large composition of aluminium, magnesium and copper.

The process for these machines start with melting the metal in a separate furnace.

Our company has earned great laurels as manufacturers, traders and suppliers of Zinc Casting in the market at present. Common applications include connectors for wire and cable, electrical plug type connectors, door knobs, screws and nuts, bushings for corrosion, rolling mill bearings, and many more. The main function of this particular group of metals is to improve machinability.

This process uses three alloys of zinc, i.e. alloy 3, alloy 5 and alloy 7. We use mainly these alloys of zinc, because these alloys have good ductile and malleability properties.

Our company has earned great laurels as manufacturers, traders and suppliers of Zinc Die Casting in the market at present. The main function of this particular group of metals is to improve machinability. We use mainly alloys of zinc, because these alloys have good ductile and malleability properties.

They are known for their resistance towards corrosion and abrasion and their long service life. Common applications include connectors for wire and cable, electrical plug type connectors, door knobs, screws and nuts, bushings for corrosion, rolling mill bearings, and many more.

We are successful manufacturers, exporters, traders and suppliers of Pressure Die Casting and have never failed our customers on the aspects such as durability, design and patterns. The ejector die contains the ejector pins and usually the runner, which is the path from the sprue or shot hole to the mould cavity.

The cover die is secured to the stationary, or front, platen of the casting machine, while the ejector die is attached to the movable platen. The mould cavity is cut into two cavity inserts, which are separate pieces that can be replaced relatively easily and bolt into the die halves.

We are successful manufacturers, exporters, traders and suppliers of Pressure Die Casting and have never failed our customers on the aspects such as durability, design and patterns. This one relies upon a pool of molten metal to feed the die.

At the beginning of the cycle the piston of the machine is retracted, which allows the molten metal to fill the gooseneck. The pneumatic or hydraulic powered piston then forces this metal out of the gooseneck into the die.

We are successful manufacturers, exporters, traders and suppliers of Pressure Die Casting and have never failed our customers on the aspects such as durability, design and patterns. Further, these dies are fabricated at our state-of-the-art manufacturing unit under the guidance of our qualified professionals using the finest quality raw material and advanced technology.

Tested against various quality parameters, we offer them at most reasonable prices.

Dscaff SAS/SBS Tableform. SAS Support.

By utilising high grade steel tubing we can not only provide high strength but also keep the weight of the system components much lighter compared to other systems. This weight reduction can be as much as 20% in some cases. The traditional ring lock design has been enhanced with a patented forged and tapered ring , used together with forged wedges and re-engineered ledger ends, the system stiffness has been greatly improved in terms of capacity,

Dscaff-SAS Staging Access Shoring. SAS (Shoring Access and Staging. The backbone of the system is found within the material properties.

By utilising high grade steel tubing we can not only provide high strength but also keep the weight of the system components much lighter compared to other systems. This weight reduction can be as much as 20% in some cases. Dscaff's SAS is manufactured to ensure total quality control pertaining to every aspect of the production.

Dscaff SAS Modular Scaffolding (Staging Access Shoring). SAS Modular system boasts many unique design features such as forged rings, forged wedges, ultra high tensile steels to name a few.

By utilising high grade steel tubing we can not only provide high strength but also keep the weight of the system components much lighter compared to other systems. This weight reduction can be as much as 20% in some cases.