Component Edge Protection. Precast Attachment square. Art no. 1233. This innovative attachment is easily placed, rotated into position on its three feet, and secured to the rebar to prevent movement during the pour.

It will accept loading in any direction and therefore does not require careful orientation. The pre-cut plastic sleeves are inserted once on site. This attachment will support the edge protection before the topping has been poured. Weight 0.6kg. Complies with EN13374 Class A.

Edge Protection. Precast Attachment. Art no. 4233. This innovative attachment is easily placed, rotated into position on its three feet, and secured to the rebar to prevent movement during the pour.

It will accept loading in any direction and does, therefore, not require careful orientation. The pre-cut plastic sleeves are inserted once on-site. This attachment will support the edge protection before the topping has been poured. Weight 0.6kg. Complies with EN13374 Class A.

Edge Protection. This attachment is positioned and cast into the pre-cast unit at the factory. A Flexi Attachment (Art no1221) or Façade Bracket (Art no 1223/1224 for Framed Barriers) is then fitted to the Precast Edge Attachment on site, to support the edge protection beyond the edge of the slab. This permits clear access for levelling off or completing other surface works whilst protected.

The assembly will support the edge protection before the topping has been poured. Weight 0.7kg. Complies with EN 13374 Class A. Hot-dip galvanised finish.

New Combisafe Power Post fixes between concrete floors and soffits without anchor to provide safe and rapid installation of edge protection. Telescopic post with compression unit for friction/friction fitting between floor and soffit. Mechanical anchor option with POWER POST Foot. Visual compression indicator provides built in safety check.

Rapid one-man rigging when using a powered impact wrench. Complies with EN13374 Class A. Level Indicator aids precise vertical rigging.

Component Edge Protection. Multi Clamp Adapter 30°. Art no. 1515. The Multi Clamp Adapter 30° places the safety post outside the stair and gives larger width of the stair.

Works on both the left and right hand side of most stairs with a 25-35° stair angle. Can be pre-mounted to the Multi Clamp. Weight 0.9kg. Hot-dip galvanised finish. Complies with EN13374 Class A.

Edge Protection. Multi Clamp Adapter 30. Art no. 4515. The Multi clamp Adapter 30° places the safety post outside the stair to maximise stair width.

Works on both the left and right hand side of most stairs with a 25-35° stair angle. Can be pre-mounted to the Multi Clamp. Weight 1.2kg. Hot-dip galvanised finish. Complies with EN13374 Class A.

Framed Rail Barrier 1.3m. Art no. 3351 / 3351G. A systemised alternative to posts and wooden rails. For use as guardrail on horizontal surfaces this light, quick and easy to install solution has great work-through possibilities.

Top rail, intermediate rail and toeboard all in one. Size 1256 x 1150mm. Weight 9.0kg. Hot-dip galvanised and powder coated finish. Complies with EN13374 Class A. Art no. 3351G has a hot-dip galvanised finish.

Framed Mesh Barrier 1.3m. Art no. 3361 / 3361G. A systemised alternative to posts and wooden rails. For use as guardrail on horizontal surfaces this light, quick and easy to install solution has work-through possibilities.

The framed Steel Mesh provides great overall fall safety. Size 1256 x 1150mm. Weight 9.0kg. Hot-dip galvanised and powder coated finish. Complies with EN13374 Class A. Art no. 3361G has a hot-dip galvanised finish.

China Manufacture Galvanized Edge Protection Barriers. Mainly Component for Edge Protection Steel Mesh Fence. Welded Wire Mesh Panel.

The panel used Q195 Low Carbon Steel Wire 8.0mm and 5.0mm, with high tensle strength which can Withstand greater impact. Bottom Metal Plate. At the bottom of the Steel Mesh Fence, there is metal plate as the toeboard giving full debris containment when installed outside the working surface.

Component Edge Protection. Rebar Socket Square.

It's a simple yet highly effective solution that will save precast manufacturers both time and effort. Finished floor/wall slabs can then be delivered to site pre-prepared for edge protection to be fitted before being craned into position.