Swipe left or right to close the panel.
×
Top 10 Most Related Posts
Best Review Based on Most Mentioned Phrase / Active User
High Performance Engines
5 times mentioned • D F Z Z • 19 June 2018
High Performance Engines
Die Casting Produces Highly Repeatable
3 times mentioned • Jayden Lee • 07 August 2017
Die Casting Produces Highly Repeatable
Aluminum Die Casting produces highly repeatable, complex shapes and at very competitive prices. Aluminum is strong, light-weight, corrosion resistant, readily plateable and electrically conductive. That's why aluminum die castings are preferred world-wide when performance, good looks and low cost are important. With cast-in steel components extreme abrasion and wear resistance can be added to standard benefits of aluminum die casting. Rajshi uses cold chamber machine die casting for aluminum because of its high melting point.
|
|
High Melting Point
3 times mentioned • Nelson Lim • 22 June 2019
High Melting Point
The universal recycle plastic resin. PP (polypropylene) has a high melting point, and so is often chosen for containers that must accept hot liquid. PS (polystyrene) can be made into rigid or foam products. In the latter case it is popularly known as the trademark Styrofoam. Polycarbonate is the hard plastic that has parents worried these days, after studies have shown it can leach potential hormone disruptors.
|
|
Multigrade Engine Oil Specially Engineered
3 times mentioned • Micheal Chong • 07 October 2016
Multigrade Engine Oil Specially Engineered
Syntium 1000 SM 15W-50
Specially Engineered Ultimate Performance Engine Oil Exceeds the Latest API SM Specifications
PETRONAS Syntium 1000 is the next generation fully synthetic ultimate performance multigrade engine oil specially engineered to provide the ultimate engine protection and performance for current and future generation high performance engines especially those fitted with emission control devices running under the most extreme, most demanding driving conditions.
|
|
Multigrade Engine Oil Specially Engineered
3 times mentioned • Micheal Chong • 07 October 2016
Multigrade Engine Oil Specially Engineered
Syntium 5000 SM 0W-30
Next Generation Ultimate Performance Engine Oil
PETRONAS Syntium 5000 is the next generation ultimate performance fully synthetic multigrade engine oil specially engineered to exceed the latest ILSAC GF-4 and the API SM standards meant for current and future generation high performance engines especially those fitted with emission control devices.
|
|
Multigrade Engine Oil Specially Engineered
3 times mentioned • Micheal Chong • 07 October 2016
Multigrade Engine Oil Specially Engineered
Syntium 5000 SM 0W-40
Next Generation Ultimate Performance Engine Oil
PETRONAS Syntium 5000 is the next generation ultimate performance fully synthetic multigrade engine oil specially engineered to exceed the latest ILSAC GF-4 and the API SM standards meant for current and future generation high performance engines especially those fitted with emission control devices.
|
|
Goodyear Eagle F1 Asymmetric
165 times mentioned • Ming Wai • 09 May 2019
Goodyear Eagle F1 Asymmetric
Goodyear Eagle F1 Asymmetric 3 tyres for exceptional driving experience. Premium and luxury sports cars are powered by high performance engines to create an exceptional driving experience. However, a great experience cannot be achieved without having equally high performance tyres to transfer the aforementioned power output to the asphalt effectively.
|
|
Made In Japan
73 times mentioned • Mandy B B • 26 May 2018
Made In Japan
Denso Iridium Plug (Made in Japan).
0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.
|
|
The Most Widely Used
10 times mentioned • Mandy B B • 07 September 2017
The Most Widely Used
Aluminum and zinc alloys are the most widely used, and are followed by magnesium, zinc-aluminum (AZ) alloys, copper, tin and lead.
Zinc, lead and tin based alloys are classified as low melting point metals, all melting at less than 725oF (385oC). Zinc-aluminum (ZA) alloys have a slightly higher melting range of 800oF to 900oF (426oC to 482oC).
Aluminum and magnesium alloys are considered to be moderate melting point alloys, being cast in the 1150oF to 1300oF (621oC to 704oC) range. Copper alloys are considered to be high melting pint.
|
|
High Moisture Retention Properties
3 times mentioned • Amelia Kate • 24 April 2020
High Moisture Retention Properties
Poweful cartilage ingredients for amazing joints! Together with collagen and hyaluronic acid, Proteoglycan is an important component in the formation of cartilage. It has extremely high moisture retention properties and provides the joints with a cushioning effect. It is believed that the joints' ability to regenerate declines as levels of Proteoglycan decrease Assimilation of
|
|
Everyone can have their own blog websites now. People use Invaber to blog their life, post their wishlists, post their preferences, share with others on Google. You also can discover more on what you blog. Invaber is sponsored by Microsoft.
|
Join Invaber |
|
What is Invaber? |
Lastest Business
|
|