Swipe left or right to close the panel.
×
Top 10 Most Related Posts
Best Review Based on Most Mentioned Phrase / Active User
Blow Off Valve
8 times mentioned • Joey Yap • 26 May 2018
Blow Off Valve
Universal Car Vehicle Turbo Blow Off Valve Parts & Accessory for VW Audi A6 B6 C6 Etc. Blow Off Valves are eliminate compressor surge and preventing premature boost leakage, while increasing boost response between shifts. Each valve is made of billet aluminum frame and provides performance that cheap piston types cannot offer. High precision aluminium valve body finished in anodised gun metal.
The spring prevents premature action under high boost.
Adjustable spring tension to handle different boost levels.
|
|
Blow Off Valve Dump Valve
3 times mentioned • Mandy B B • 26 May 2018
Blow Off Valve Dump Valve
Blow Off Valve Dump Valve Diverter Turbo BOV for Volkswagen / Audi 1.8T 2.7T. The splitter valve gives a combination of blow off and recirculation valve operation all at the same time and has been specifically designed for the many turbo engined applications that operate metered airflow management systems. 100% brand new. Fits for Volkswagen Audi 1.8T 2.7L engines.
Comes with blanking plug and blanking cap.
Professional installation is highly recommended.
|
|
Blow Off Valve
8 times mentioned • Jackson Z • 22 June 2018
Blow Off Valve
There are far more smog legal supercharger kits than there are smog legal turbo kits. The reason is that the supercharger doesn't have as much smog altering or modifying equipment such as a turbo usually. While a supercharger can have an intercooler and blow off valve, it does not have a wastegate. These items can make your car or truck not pass smog, and would need to be expensive to be done in an emissions friendly way, which makes them out of the budget for most people.
|
|
Blow Off Valve
8 times mentioned • Jackson Z • 22 June 2018
Blow Off Valve
Blow off valve - This is the thing that results in the ‘chuuuoooo' when the throttle is released. Not essential in a low pressure setup as the pressure buildup is not significant enough to cause damage to the turbo. Also not advisable if you're trying to keep the setup discrete if the authorities don't allow turbo mods.
|
|
Blow Off Valve
8 times mentioned • Joey Yap • 26 May 2018
Blow Off Valve
Blow Off Valve S Diverter Turbo BOV Boost For VW for Audi 1.8T and Golf Jetta. The air evacuation valve helps to blow away the excess air, protects the engine throttle and the intake pipe, and eventually forms the sound of the cold sound car. The exhaust valve has a harder / softer adjustment so that you can properly set up your turbocharging settings and a correct set of vent valve to reduce reflection and idling. This is a high quality project with good performance, and BOV will provide you with a cool experience.
|
|
Car Accessories
110 times mentioned • Tony Anderson • 01 June 2015
Car Accessories
Mitsubishi Triton
24 times mentioned • Wai Kit • 19 December 2018
Mitsubishi Triton
Against Premature Wear
5 times mentioned • D F Z Z • 19 June 2018
Against Premature Wear
Wheel alignment is the process of properly aligning the wheels and axles. It ensures that your car handles at its optimum level, increasing safety as well as protecting tyres against premature wear and saving fuel. Wheel balancing balances the wheel and tyres. It protects the bearings and suspension, prevents premature tyre wear and stops vibration. Out of balance wheels, and the vibration they cause, is typically most noticeable when driving at high speeds.
|
|
Brass Copper Fittings
13 times mentioned • Mandy B B • 07 September 2017
Brass Copper Fittings
Brass Copper Fittings (INDIA) is a leading manufacturer of Bronze Castings and Tin Bronze Casting, Phosphorus Bronze Casting, Aluminum Bronze Casting, Leaded Bronze Casting, Silicon Bronze Casting, Manganese Bronze Casting, Gun Metal Casting, Gun Metal Cast Fittings etc. Employing a full range of non-leaded bronze and copper alloys, BCF produces superior quality green sand castings up to 100 pounds.
|
|
Snow Wolf 200w
11 times mentioned • Scorpion King • 07 December 2015
Snow Wolf 200w
I have the Snow Wolf 200w TC. This thing is so fun I can hardly put it down for long. I have the limited edition with the gun metal finish. It also has the updated chip on this model. The first gen snow wolf 200 had some issues that were addressed with the new version. The only cons so far are
Fingerprints get on the mod too easily constantly wiping them away just to leave more in a few seconds.
Changes to pulse mode when you turn up the mod sometimes over 150 watts (though I never need that kind of burn anyway even on my dripper) Depending on what your build is also. I'd have to be insane to try it out of a subtank with that kind of wattage
|
|
Everyone can have their own blog websites now. People use Invaber to blog their life, post their wishlists, post their preferences, share with others on Google. You also can discover more on what you blog. Invaber is sponsored by Microsoft.
|
Join Invaber |
|
What is Invaber? |
Lastest Business
|
|