Sanding is a very dusty, noisy and messy job. Wear protective clothing, including ear protectors and a respiratory mask.

Cover and mask around doors to prevent dust from spreading throughout the house (image 1). Open all windows, so that you work in a well-ventilated room.You need three sanders: a heavy-duty drum sander (a drum wrapped in sandpaper that rotates at high speed) (image 2); a heavy-duty edging sander (image 3) and a corner sander (image 4). Each requires sandpaper in a particular shape, which is available from the rental store.

Cookie Cutter A cookie cutter in American English and biscuit cutter in Commonwealth English is a tool to cut out cookie/biscuit dough in a particular shape. They are often used for seasonal occasions when well-known decorative shapes are desired, or for large batches of cookies where simplicity and uniformity are required.

Any sofa can be bold and beautiful in a contemporary pattern like this stripe (or another fun geometric), but the particular shape of a roll-arm sofa helps soften the edges of a bold print, making it feel livable instead of purely dramatic. This sofa calls out to be sunk into, not just admired from afar (although you'll want to do that too).

Handy and specialized application in the fashion industry field for two dimensional and three dimensional CAD/CAM services. Lets you use both flat and three-dimensional technology for producing their clothes.

The virtual models can be designed for converting 2-Dimensional image to 3 Dimensional.

Install the Backer Board.When the entire section of the floor is covered, set the backer board down slowly (Image 1). Make any slight corrections and adjustments while the thinset is wet.

When the board is in the right place, begin screwing the backer board into the flooring below (Image 2). The backer board has a grid to follow so the screws go in the correct location. Repeat this step until the floor is covered entirely with backer board and is completely bolted down (Image 3).

Lay Subsequent Rows. Use the short trimmed section of the previous row to start the next row. This will ensure the joints between planks in a row are staggered from the joints in adjoining rows (Image 1).

The laminated flooring in this project has a soundproof backing and textured cherry wood finish. It snaps together by lining up the planks at an angle and then flattening out the row being installed (Image 2). To save the edges of the flooring boards, use a piece of scrap wood to tap adjoining rows together.

Lay the Tile.Next, plot out a tile pattern. Using spacers as a guide, lay one row of tiles all the way across the floor and another row of tiles perpendicular to the first row (Image 1).

Laying out the tile before setting it provides a good estimate of how much tile is needed and where you might run into problems along the floor.With a good idea where the tile will fall, lift the first tiles and spread thinset with the notched trowel, keeping the trowel at a 45-degree angle (Image 2). Lay the tiles down carefully and make any corrections .

Way Ne Hardware Supply Sdn Bhd is a company that supplies hardwares, safety tools and road safety equipments. Our main office is located in Klang, Selangor, Malaysia.

We supply a wide range of products such as hearing protection, respirator protection, hand protection, head protection, eyewear protection, foot protection, fall protection, protective clothing, fire fighting equipment, arch flash protective clothing, marine & life jacket, etc.

Women biker jacket by Lazada RM 109. Lazada title. Women Short Style Leather Jacket & Coat (Black). Look more details compare to the cheap one which is quite plain. Just not sure thick or thin only.

Slim fit cutting, Clothing pocket style : Side seam pocket. Suitable for casual look. Full Zipper. This leather jacket typically has sleeves, and fastens in the front or slightly on the side. This leather jacket is generally lighter, tighter-fitting, and less insulating than a coat, which is outerwear. Some jackets are fashionable, while others serve as protective clothing.

This is a great hazard to the face and eyes especially, as well as other parts of the body, and as such, a full face shield and other protective clothing must be worn. Angle grinders should never be used without their guard or handle attached; they are there as a necessary precaution for safety.

All work should be securely clamped or held firmly in a vise.