Wall that has gone through long aging process will experience portion that is damaged by water leaking, scratches, other potential external forces and internal wall quality issue. Skimmer in Malaysia will need to make sure the holes, deep scratches are being filled up before applying two layers of skim coat compounds.

Then and there, surfaces will be treated with sanding before any wallpaper or paint applied on it, right after the coat dries and has become smooth.

Floor Problem and their solution,EXCESSIVE WEAR.Even when sanded and finished properly, wood requires regular maintenance. Grit left on wood floors acts like sandpaper when walked on, and unclipped pet nails or unprotected furniture feet can scratch a finish considerably.

At times, I've been able to recoat a slightly worn floor without sanding off all the old finish. But when a floor has lots of wear and deep scratches, it's best to sand down the floor to bare wood and refinish it.

COMPARE LAMINATE AND ENGINEERED WOOD Engineered Wood Flooring:In that it is made of wood, it does not conduct cold well. Laminate Flooring:Aminate is thicker than vinyl and incorporates wood content, it is easier to walk on and warmer to the touch than vinyl. Engineered Wood Flooring:Engineered wood can receive only a limited number of sandings before the veneer layer wears through.

Laminate Flooring:Laminate cannot be refinished. You can fill in deep scratches on a spot-by-spot basis.