Red Rubbish Chute Funnel. Moulded from polyethylene, enables tipping direct from roof level.

Sits inside the top rubbish chute. 510mm (20”) top diameter. Weight: 10kg.

Universal Fixing Frame - Compatible with 500mm & 560mm Rubbish Chutes. Installation of the fixing frame.

The top rubbish chute is then connected to the short chains on the fixing frame. Other chutes follow below this and a top hopper can be slotted in the first connecting chute. The height of the top hopper can vary depending on the height the fixing frame is installed.

Universal Fixing Frame - Compatible with 500mm & 560mm Rubbish Chutes. This universal fixing frame is required to attach the top rubbish chute to the scaffolding on a building/construction site. Recommended to hold 10 chutes (100-150kg, including bracket weight).

Adjustable width to fit 20” & 22” chutes. Weight: 15kg. Black as standard.

Rubbish Chute Top Hopper Section. These 1m rubbish chutes are compatible with most systems supplies in the UK and Europe.

The top hopper sits inside the top and does not require any fittings. This section allows rubbish to be tipped directly from the roof level.

The Wotofo Serpent BF RDA is a 22mm bottom fed two post, four terminal, RDA for use with Squonk devices. The Serpent BF RDA is built specifically for bottom feeding and features a gold plated BF pin, 6mm deep juice well, and a unique three piece construction in which the deck sits inside the cupped outer barrel.

The top cap features micro knurling for adjusting the side airflow and can utilize both 810 and 510 drip tips. The Serpent BF RDA features a condensed chamber and domed top cap for enhanced flavor delivery.

Standard Rubbish Chutes. Our standard rubbish chutes are used between floor levels to provide safe disposal of rubble and waste to ground level.

Top Hopper Rubbish Chutes. Our Top Hopper Chutes allow access to the chute system at the uppermost roof level. They feature a wide open top which acts extra protection when debris is being loaded.

Rubbish Chute-Top Hopper. Our Top Hopper Chutes allow access to the chute system at the uppermost roof level.

They feature a wide open top which acts extra protection when debris is being loaded. They are used in conjunction with a support frames.

Rubbish Chute Standard. The Standard Geda Ribbish Chute is made of high quality plastic with a 4mm wall, it is quick and easy to fix with a double hook mechanism.

The accessories also provide for a dust free option. Each section is 1.2m and weight 10kg.

Rubbish Chutes. A fast, effective and safe way to remove site debris. Quickly and easily assembled from 1m sections. Held together by chain and clips.

By adding a Y section, alternative levels below the hopper can have access to the chute. Chute Top Diameter = 0.56m, Weight = 9kg. Top Hopper Top Diameter = 0.56m, Weight = 10kg. Side Entry Top Diameter = 0.56m, Weight = 10kg.

Rubbish Chute Universal Fixing Frame. Rubbish Chute – Universal Fixing Frame Tailor-made, extremely safe method of connecting chute system to scaffolding.

510mm (20”) top diameter. Weight: 10kg.