Component Edge Protection. Flexi Safety Post. Art no. 1107. A safety post that simplifies installation in corners, on stairs, or around balconies, etc.

The guardrail holders are adjustable depending on the angle and inclination of the edge protection. Length 1200mm. Weight 5.8kg. Hot-dip galvanised finish. Complies with EN 13374 Class A, B, C.

Casting In Site. With a structure framework cast-in-site there is the possibility of designing attachment points for the edge protection.

Socket w rebar with integrated post lock, for example, can be cast into the wall tops in, for instance, house gables, lift- and stair shafts. After this Post 1,3 m and Barriers are installed. In order to be able to build external panel walls from inside the slab Balcony bracket 10 Degrees can be installed as an attachment, which gives an inclination of the edge protection by approximately 10 degrees.

China Manufacture Galvanized Edge Protection Barriers. Mainly Component for Edge Protection Steel Mesh Fence. Welded Wire Mesh Panel.

The panel used Q195 Low Carbon Steel Wire 8.0mm and 5.0mm, with high tensle strength which can Withstand greater impact. Bottom Metal Plate. At the bottom of the Steel Mesh Fence, there is metal plate as the toeboard giving full debris containment when installed outside the working surface.

Component Edge Protection. Rebar Socket Square.

It's a simple yet highly effective solution that will save precast manufacturers both time and effort. Finished floor/wall slabs can then be delivered to site pre-prepared for edge protection to be fitted before being craned into position.

Component Edge Protection. Front Attachment. Art no. 1455. Mounted vertically and used both as an edge protection support and as a shuttering support.

Using a single fixing point a wide range of applications can be covered. Fixing methods include using form ties, threaded bar, drilled fixings, and cast in sockets. Weight 1.7kg. Hot-dip galvanised finish. Complies with EN 13374 Class A.

Component Edge Protection. Steel Mesh Barrier Hinge. Art no. 3225. A small and simple device to fasten Steel Mesh Barriers together.

The Steel Mesh Barrier Hinge will also allow easy access. Corners can be created at any angle between 76° and 284° when attached to the end of the barriers, but can also provide angled corners at any position along the barrier. Weight 0.7kg. Registered Design. Zinc-plated. Complies with EN 13374 Class A.

Component Edge Protection. Steel Mesh Barrier Adjuster. Art no. 3224.

A small and simple device to fasten Steel Mesh Barriers together. The Steel Mesh Barrier Adjuster allows the barrier to be adjusted in height without having to dismantle the system. Weight 2.9kg. Patent Pending. Hot-dip galvanised finish.

Component Edge Protection. Barrier Accessories.

To ensure that the Steel Mesh Barrier system is truly universal, the COMBISAFE® includes an extensive range of accessories to facilitate broad use of the product.

Component Edge Protection. Rebar Socket Square. Art no.

11423. Combisafe has developed an innovative socket for use with its edge protection posts or traditional scaffolding. The socket is fixed at a junction of the rebar mesh before further reinforcements are added and the concrete poured. The use of the robust hook and anchor ensures the socket will not move while the casting table is oscillated or vibrated, or while the concrete surface is being keyed.

Component Edge Protection. Safety Posts. Art no. 1102 / 2000. When mounted in the various attachments and combined with the Steel Mesh Barrier or classified timber guardrails, forms a safe fall prevention solution.

The Quiclox locking mechanism eases installation and dismantling in the various attachments. Art no. 1102/Length 1200mm/Weight 3.7kg. Art no. 2000/Length 1200mm/Weight 3.9kg. Hot-dip galvanised finish. Registered design. Complies with EN 13374 Class A, B, C.