Edge pro­tection system XP on the formwork. Safety barriers on sheeting walls.

Sheet pile adapter XP is used in combination with Protective grating XP, scaffold tubes or guard-rail boards for erecting safety barriers on sheeting walls.

Edge pro­tection system XP on the formwork. Doka personal fall-arrest set.

With the Doka personal fall-arrest set you can protect your crew in situations where guardrail systems such as side handrail clamping units or personal fall-arrest sets are not feasible. Introductory training required.

Edge pro­tection system XP on the formwork. Pro­tection at load-bearing masonry walls The Protective grating holder XP is used for securing Protective gratings XP of all types to masonry walls of sufficient load-bearing strength (e.g.

as fall protection in front of doorway openings, shafts, balconies, etc.).

Edge pro­tection system XP on the formwork. Fixing to concrete floor-slabs.

Used in conjunction with the Express anchor 16x125mm, the Handrail-post shoe XP makes it possible to retrofit the side railings.

Edge pro­tection system XP on the formwork. Stairways.

The Step bracket XP is fixed to the end face of the stairway and allows the tiles or flagstones which are being laid on the steps to project out by as much as 4 cm.

Edge pro­tection system XP on the formwork. Using on Dokaflex tables.

The Dokamatic adapter XP is used to attach a Handrail post XP to a Dokamatic table. The adapter is suitable for all sizes of table and has an integral lowering function.

Edge pro­tection system XP on the formwork. Using on wall formwork The Framax adapter XP is used to mount the side railings to the opposing formwork.

The advantage of this solution is that the side railings can be attached to the formwork while it is still flat on the ground, and will stay permanently fixed to the formwork both while it is being repositioned and when it is in the cleaning position (with the form-ply facing upwards). During pouring, the railings can be tilted backwards by 15 degrees.

Edge pro­tection system XP on the formwork. Flat roofs and parapets Fall-arrest barriers for e.g.

guttering and other rooftop work can also be put up on flat roofs and parapets using Floor end-shutter clamps and Handrail-posts XP 1.20m.

Utilisation. Edge pro­tection system XP on the formwork.

all spacings and lengths of grating are sized to fit Doka formwork systems, and are statically optimised. after every forming cycle, the component geometry may mean that different requirements need to be met: XP is easy to adapt. fluid transition from flexible deployment on the formwork to long-term use on the structure shell.

Edge pro­tection system XP on the structure shell. optimised connector components for both building-construction and civil-engineering applications. easy to adapt, thanks to wide distances between uprights.

protective gratings can easily be raised for mounting the exterior facade. the protective gratings are easy to remove, e.g. before equipment is transported. easy, liftout-proof floor anchorages using Screw sleeve 20.0, for pressing into soft concrete.