Boom Lifts. Telescopic Booms.

SJ40/45 T. Standard features Axle based 4WD system, “Detroit Locker” type rear differential and limited slip, front differential, oscillating axle, drivable at full height, 50% Gradeability, diesel or dual fuel engine, swing out engine tray, swing up cowlings, modular platform railing system, tri-entry sliding mid rails, 110V AC outlet on platform with GFI, direction sensing drive and steer controls, proportional controls, relay based control system, color coded and numbered wiring, 360° continuous turret rotation.

Vertical Mast Lifts. SJ12/16.

Standard features Drivable at full height, variable speed, front two wheel hydraulic drive, zero inside turning radius, dual holding brakes Proportional controls, 20” (0.51 m) Traversing platform, 24V DC power source, low voltage battery protection, 30% Gradeability, solid rubber, non-marking tires, pothole protection system, 110V AC outlet at platform with GFI, 28 mph wind rating (12.5 m/s), tilt alarm with drive & lift cut-out, all motion audible alarm, lanyard attachment points, operator horn and etc.

Electric Scissor Lifts. SJIII 3215/19.

Standard features - Drivable at full height, wariable speed, front two wheel hydraulic drive, 90° steering (zero inside turning radius), dual holding brakes, proportional controls for drive & lift functions, 3' (0.91 m) Roll out extension deck, 24V DC power source, low voltage battery protection, 30% Gradeability, solid rubber, non-marking tires, pothole protection system, 110V AC outlet on platform with GFI, 28 mph wind rating (12.5 m/s), tilt alarm with drive & lift cut-out and all motion audible alarm.

Electric Scissor Lifts. Rough Terrain Scissors.

SJ6826/32 RT. Standard Features - Crossover symmetrical 4WD, drivable at full height with roll out deck fully extended, 5' (1.52 m) Roll out extension deck, dual fuel (gas/propane) or diesel engine, 90° swing out engine tray, multiple wet disc spring applied hydraulic release brakes, 110V AC outlet on platform with GFI, up to 50% Gradeability, foam-filled low profile grip lug tires, tilt alarm with drive & lift cut-out, lanyard attachment points, all motion audible alarm, operator horn and etc.

Design Philosophies. Skyjack's products are designed to be easy to service and maintain.

Skyjack booms utilize direction sensing drive and steer controls. This means that boom lift controls are always in the orientation of the operator regardless of position of turret over chassis, eliminating the need for colored direction arrows on the base or controls for operator to decode.

Skyjack Aerial Work Platform are world renowned for product reliability. Skyjack manufactures a full range of aerial work platforms and telehandlers. Our two vertical mast lifts compliment an established lineup of electric on-slab scissor lifts and rough terrain scissors lifts.

All machines feature common relay based control systems with color coded and numbered wiring. Functions and operation are similar on all machines. Platform heights range from 12' to 50'.

Simply Reliable. All Skyjack aerial work platforms feature Robust steel construction, strong durable and easy to repair, hard wired relay based control systems which are easy to trouble shoot and repair using commonly available components, no complicated and expensive computers or can-bus systems which require a PC to diagnose, standard color coded and numbered wiring system and 2 year warranty.

Skyjack Aerial Work Platform are world renowned for product reliability. A growing boom lineup features both articulating and telescopic boom lifts.

Similar to its scissor lifts, Skyjack booms also feature a relay based control system with color coded and numbered wiring. All machines features axle based drive system. Rounding out its product lineup are Skyjack's telehandler models – with lift capacities ranging from 6,000lbs to 20,000 lbs.

Aerial Work Platform. The 260 TJ telescopic platform has a platform with large dimensions which can hold up to 3 operators or 400 kg.

Its maximum working height of 25.9 m, its horizontal outreach of 19.7 m, its rotating pendular arm of (+/-70°), and the continuous turret rotation capacity of 360° provides the operator with a large working area as well as flexibility of use.

The Manitou 280 TJ diesel-powered telescopic platform provides the greatest working height of the range (27.75 m). Thanks to the continuous turret rotation and its horizontal outreach of more than 21 m, movements of the machine are reduced and the operator has an exceptional working area.

Its significant ground clearance combined with its all-terrain capabilities guarantee a high-level clearance capacity.