Skimming contractor Malaysia will sand the surface, clean up the dust with damp cloth, vacuum; subsequently any opening joints shall be treated with appropriate taping material, before final step where approximately 0.3cm of plaster material to be patched on the wall and ceiling surfaces. Skim coat applicator in Malaysia also pay much attention on the hardening of skim coating material , in which it can be prevented through some add-on of water.

There are many aspects shall be concerned at, the technical specification, technical briefing, application guidance, after sales warranty and many others. Skim coat applicator in Malaysia usually will attach with few brands or single brand for skim coat or other wall finishing products.

The rationale behind this is due to the brand owner or manufacturer has spent a lot of time, effort to train, evaluate and provide solid support and trust on the panel recommended applicator

Interior designers will specify in the suitable lighting design to ensure the efforts of skim coating will not be wasted since skim coat takes up a lot of time and it might incur further costs since plasterers can be obtained easily, while skim coat applicator in Malaysia who has established experience and technical know-how is relatively higher in employment cost.

there are possibilities to get diverse tiles, wallpapers, awesome paint options in order to replace or complement the skim coat base. Imaging after the skim coat applicator Malaysia done the hard works on the nice wall, appealing paint that applied on top of it will improve the visual point of the wall or even on the ceiling.

Why Skim Coat? Many house owners will go for skim coat after advised by skim coat applicator Malaysia; although it consumes up a lot of time, the wall is attractive when it coupled with semi-glossy or glossy paint.

Even without the paint, it gives the impression of gorgeous coupled with spot light or any kind of lighting.

Skim coat applicator Malaysia is also normally the painting contractor, because in order to have painting work to be done, it must be coupled with quality skim works. The water-to-powder ratio adjustment of skim coating should be carried out carefully, to prevent the situation where compound becomes too watery and it cannot stick to trowel tool; on the other hand, insufficient water will cause the compound look like cake and solid form.

According to statistics, the skim coat work shall be carried out within a small section, i.e. three square feet.

Skim coat applicator Malaysia emphasizes on this is because it allows sufficient time to smoothen the plastering component right before it turn into dry hardened layer.

Aathaworld Sdn Bhd as a painting, skim coat and plastering material supplier, skim coat applicator and contractor in Malaysia, we are able to provide plastering, skim coating supply and apply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak

Aathaworld Sdn Bhd as a painting, skim coat and plastering material supplier, skim coat applicator and contractor in Malaysia, we are able to provide plastering, skim coating supply and apply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; Besides our own brands for construction chemicals and coatings,

Our textured coating services and textured wall coating services are a mixed anti-crack and weatherproof coating material that are practical and easily installed in residency house, hostel, apartment, condo, coffee shop, restaurant, shop house, hotel, college, and shopping mall. Our textured coating services and textured wall coating services are designable in term of design and colour that can be rendered to suit your style and building requirement.