Skim coat (or skimming) is carried out in order to smoothen a surface, usually referred to wall finishes. Skim coating allows the wall ended up with cement plaster outlook, imperfect wall surface can be covered and touched up at this stage.

Skim coat supplier in Malaysia generally will produce polymer modified cementitious skim coat, it consists of additives that used to enhance consistency, bonding, water retention level and most importantly, the workability of skim coat contractor Malaysia.

Finish Grey 381. A high quality polymer modified cementitious skim coat, specially formulated to be used as a finishing coat on Base Coat. Base White 385 A top quality polymer modified cementitious skim coat.

Specially formulated to be used as the undercoat on concrete surfaces and soffit. It is also suitable for surface improvement on cement rendered surfaces. Hardened Base White surfaces can be further smoothened with Finish Coat.

A top quality polymer modified cementitious skim coat. It is specially formulated to be used as the undercoat on concrete surfaces and blockwalls.

It is suitable for surface improvement on cement rendered surfaces. Hardened Base Grey surfaces can be further smoothened with Finish Coat.

Polymer modified cementitious skim coat, contains additives that improve workability, consistency, water retentivity and bond strength. They are specially formulated to be used on concrete surfaces and block walls.

Clean up the dust, wash it to get rid of grease as well as wipe the surface with damp towel or sponge, cleaning chemicals should have been the one suitable to the wall. After all, clean water need to be used in rinsing the wall to completely eliminate the chemicals.

Skim coat contractor Malaysia does sometime use the vacuum cleaner to suck the dust particles or wipe the resistant grime with detergent.

There are more details in it, from the preparation to the after work. First, furniture and any of the entrances must be protected with splatter and dust, or furniture can be removed from the room.

Skim coat contractor Malaysia usually will bring some plastic cover or canvas to shield the floor, just to make sure the skim coat chemical will not splash to the flooring, regardless of laminated floor, tiled floor, wooden floor, carpet or other types.

There are another two levels, level four and level five where the latter is the finishing can tolerate investigation that is close by, with appropriate lighting assistance. Skim coat contractor Malaysia will carry out the check of flatness, fastener, seams under the lighting source and normally will appear no visible signal.

On the other hand, level four skim coat will only appear to be flat when painting is applied properly and it may show some flat seams.

Skim coat is a specially formulated cementitious skim coat plaster suitable for plastered on concrete surfaces for internal skimming only. It's designed to provide a smooth durable finish with excellent adhesion strength.

The surface can be either brushed or trowelled finished to meet stringent architectural requirements.

Where to Get Skim Coat Supplier & Skim Coat Contractor in Malaysia Contact us today, as we are able to do the consultancy, custom make, supply and apply plastering, skim coating, painting and refurbish for all types of residential, infrastructure, heavy usage materials, commercial buildings, shoplot, office, home renovation, office refurbishment, metal product coating such as tank, pipe, flanges, plate sheet, machinery coating as a skim coat material supplier, plasterer, wall plastering contractor, painting contractor and skim coat contractor

According to skim coat contractor in Malaysia, sandpaper can assist to knock down tool mark, defects and ridges caused by the skim coating. Top coat coverage can be enhanced through proper primer tinting at the same route with the ultimate colour.

Paint overlayment is definitely a good partner to the skim coat in most wall design, of course, it can be very common to be utilized in finishing up the ceiling surface.