Ways To Take Care Marble Floor.Mopping Your Floor with HOT WATER and add detergent to your water.Use a soft mop on your floor then Mop the floor again with clean water and use a soft towel to dry the floor.We must wash your floor immediately after a spill and use pH neutral solution.We should not let floor air dry and use a felt pad to remove scuff marks.We need to use rugs and mats throughout home and be careful using a vacuum.

FELOS PERFECT 10 - 1 LITER Concentrated floor cleaner - Tea Tree oil anti-bacterial (Reduce insect) - pH neutral - Extra shining clean - Strong resistant of dirt & grimes - Non-sticky - Environmentally friendly - Moisturizer - Anti-static (easy maintenance) - Natural flower fragrance - Reduce Insect

Optimum Coating is NOT a paint protection wax or sealant that will wash away, or break down after a period of time. However, Optimum Coating bonds permanently with the factory coat, thus, protecting the surface indefinitely.

No waxing or polishing is required after applying Optimum Coating. No special "pH neutral soaps" are required as well. Let try and see.

Quartz Kitchen Counter Top. Like any other surfaces, Quartz stone can be damaged if exposed to strong chemicals and solvents such as Trichlorethane or Methylene chloride, highly aggressive cleaning agents that have high alkaline levels (pH 8.5 and higher).

If the kitchen top is exposed to any of the products mentioned above, rinse the kitchen top with clean water immediately. If needed, use non-abrasive household cleaners will be sufficient as these will not dull the surface shine.

Mix the Belcem Base Plaster with water. Mix 7-8 ltr of water with 25kg bag of Belcem Base Plaster. Check the consistency of the mixture.

Mix the Belcem Plaster Fine with clean water. Mix 8-9 ltr of water to 25kg bag of Belcem Plaster Fine. Check the consistency of the mixture.

Another advantage of laminate wooden flooring is that it offers a warmer feel that tiles, creating a warmer atmosphere as well as a warmer surface for your children to play on. Walking barefoot on this flooring option is a dream, being softer on the feet and not as cold as tiles in the winter.

Just like tiles, laminate are also very low maintenance and easy to clean. No strong detergents, oils or waxing is required, simply mop the floor with a slightly damp mop or cloth, and sweep regularly.

Parquet Sanding Your efforts at cleaning could also damage the floor. You should take care to mop the floor using a light detergent. Using a harsh chemical or something more acidic could find damaged flooring.

A water-leak in the house might find water spilt over some area of wood-flooring, and if not dealt with soon, it might lead to permanent damage. If it gets bad, you might need some professional help.

Lime wash floor. Let the floor dry for a few hours if you used water-based urethane, or overnight if you used oil based urethane.

Apply as many more coats of sealer to the pickled floor as the sealer manufacturer recommends, letting each coat dry thoroughly before applying the next. Care for the newly-finished floor with regular sweeping and mopping, and use furniture leg sliders or protective pads to prevent scratching or scarring the finish. Waxes are unnecessary on a floor sealed with urethane, and some products can mar the finish

Lime wash floor. Mix a can of urethane sealer with a paint stir stick. Don't stir the urethane briskly, as this introduces bubbles to the liquid that will transfer to the floor.

Use the urethane straight from the can if you will apply it with a brush, or pour the sealer into a clean paint pan if you will use a floor sealer mop. Apply urethane to the floor with a fine-bristled wood finishing brush or a lambswool floor finish applicator pad fixed to the end of a long-handle floor sealer mop. Brushes are suitable for small floors.

Lime wash floor. Wipe off the stain with a clean rag while the stain is still wet, again working in the direction of the boards and the wood grain.

Move along the floor boards applying and wiping off stain in small sections at a time until you have stained the whole floor. Let the floor dry for a few hours if you used water-based stain; let it dry overnight if you used oil-based stain. Don't proceed with sealing the floor until the sealer is fully dry to the touch.